CD and DVD Drive Identify Version 1.0 has earned a perfect 5 out of 5 from BrotherSoft.

BrotherSoft Review Staff give one product the maximum 5 out of 5 Rating because this product is easy to use, it has a professional-looking interface, it is excellent compared to other programs in this section and so on.

CD and DVD Drive Identify Version 1.0 has earned a 100% CLEAN Download certificate from http://www.downloads-portal.com.

Below is what http://www.downloads-portal.com said about the 100% Clean Download certificate.

We are glad to let you know that your software "CD and DVD Drive Identify" has been downloaded and tested by our team, and it has been found completely CLEAN of viruses, adware, spyware and any kind of suspicious or potentially dangerous component. Please note that we will periodically retest your product, so this certificate will be renewed or withdrawn.

This page gives you a description of CD and DVD Drive Identify Version 1.0.

This program is a system information tool for your CD and DVD drives.

CD and DVD Drive Identify Version 1.0 is a program that shows you the Hardware Model Number, Hardware Serial Number and Firmware Revision Number for your IDE, EIDE and SATA CD and DVD drives.

This program will only work with your SATA CD and DVD drives if they are
using one of your IDE controllers.

SATA CD and DVD drives can use an IDE controller or an SATA controller.

This program does not work with pci express cards.

Also this program does not work with raid drives.

The information this program gives you is usually printed on the label of the CD or DVD drive.

The program will allow you to view this information without opening up your computer to look at the CD or DVD drive label.

This program uses direct hardware access to view this information.

Because this program uses direct hardware access to view this information this means that even if your computer bios will not recognize your CD or DVD drive this program will see your CD or DVD drive because it does not use the bios to look at the CD or DVD drive.

Your CD or DVD drive needs to be working at the hardware level to get this information.

You may wonder how this information can be useful to you.

Below are a few things that you can find out about your CD or DVD drive using this program.

You can do a search on the internet for the Hardware Model Number or the Hardware Serial Number and this search will tell you what the specifications of the CD or DVD drive are such as:

1.If the drive is a CD or DVD drive. Also if the drive is a CD-R drive,CD-RW drive,DVD-R drive, DVD-RW drive ,DVD+R drive ,DVD+RW drive.

2. The speed of the drive. This includes how fast the drive can read the CD or DVD disc. This can also include how fast the drive can write and re-write the CD or DVD disc.

3. What type of CD or DVD drive you have installed. The type of CD or DVD drive installed will be IDE, EIDE or SATA.

4. The type of media you can burn you information to such as CD or DVD media and also the size in megabytes or gigabytes of the media that you can use with you CD or DVD drive. You can also find out the max speed of the of the CD or DVD media that you can use with your drive.

You can find out more information about your CD and DVD drives than just these four things. These four things are just examples of what you can find out about your CD and DVD drives. If you want to replace your CD or DVD drive with a CD or DVD drive that can handle bigger media in megabytes or gigabytes or if you want a faster CD or DVD drive then the four examples mentioned above will be very helpful to you.

Knowing the Firmware Revision Number can be useful in the following situation below:

Lets say that you want to update the firmware on the CD or DVD drive.

You will need to know the Firmware Revision Number in order to know what version of the firmware is on the CD or DVD drive before you update it.

You want to make sure that a newer firmware exists than what is on the CD or DVD drive before updating.

The cost of the registered version CD and DVD Drive Identify Version 1.0 is $25.00

The program can be bought using a credit card. Note: This is a program that
we made so if you need any help with the program or any help making the
bootdisk then just send us an email at support@sirecovery.com or call us
at 770-683-0701 Monday thru Friday 10:00am to 6:00pm eastern time.

We will be happy to help you.

You can download the shareware version of the program to check if the program is able to see your CD or DVD drive. The shareware version will not show you the Hardware Model Number or Hardware Serial Number. It will only show you the Firmware Revision Number of your CD or DVD drives.

The registered and shareware versions of CD and DVD Drive Identify Version 1.0 are
self-extracting exe files. Just double click on the exe file you download
and the files will extract. Note: You must be in windows to extract the
files from the self-extracting exe file.

After the files are extracted then copy the files to a floppy disk.

Download the shareware version of CD and DVD Drive Identify Version 1.0

Order the registered version of CD and DVD Drive Identify Version 1.0

If you would like to have any other features added to this program then just let
us know and we will consider adding them.